What is this? The Summary page shows the latest values your YachtLINK® device has sent for this boat, one card per engine, tank, battery and piece of equipment.
The Basics
When this boat has a YachtLINK® device that is sending data, the Summary page shows:
- Engine and equipment cards — one per item, with its name and location, its make and model, its main value (such as engine hours or battery volts) in large type, its other values below, and when it was last seen.
- Tanks — two across, each with its name, location, level in percent and a fill bar. The bar is orange for fuel, blue for water and gray for other tanks.
- Battery cards — one per battery.
The groups run in that order (engines, tanks, batteries, other equipment), with no headings between them.
When the boat has no matched YachtLINK® data (no device, nothing sent yet, no signal matched yet, or the data could not be read), the page describes YachtLINK® instead, with its price and ORDER NOW.
Key Things on This Screen
- Tap the top row of a card — folds the card to just that row. Tap again to open it. Every card starts open each time you open the page. Tank tiles do not fold.
- Collapse all / expand all button (top right, next to ?) — folds every card at once, or opens them all again.
- Refresh button (bottom right) — reloads the values. You can also pull the page down.
How to Get Values Onto This Page
- Install and register a YachtLINK® device. See Setting Up YachtLINK®.
- Open YachtLINK® → Configuration and match each signal to its engine, tank or battery. See YachtLINK® Configuration.
- Come back to Summary. Matched items appear as cards.
Tips
- Only matched signals get their own card. Signals that aren’t matched yet don’t show here at all; match them on YachtLINK® → Configuration.
- YachtLINK® uploads about every five minutes while the boat has power and Wi-Fi, so values are recent but not second by second.
Troubleshooting
- “I only see the YachtLINK® advertisement” — This boat has no matched YachtLINK® data yet, or the page could not read it. If the device is sending data, match at least one signal on YachtLINK® → Configuration. Check that you are online and pull down to refresh. If the boat has a device, check its Last Seen time on the YachtLINK® page.
- “A value looks old after refreshing” — If you have an engine or equipment change that hasn’t finished saving, refreshing skips re-reading those items until it has. Wait a moment and refresh again, or pull down on My Boats.
- “A card I expected is missing” — Its signal is not matched yet. Open YachtLINK® → Configuration and match it.
Frequently Asked
Can I type values in here?
No. The Summary page only shows what YachtLINK® sends. To enter a value by hand, use Readings.
Will the cards stay folded next time?
No. Folding only lasts while you're on the page. Every card is open again the next time you come to Summary.
Do I need a subscription?
YachtLINK® needs a paid Plus (shown as Personal+ in the app for now) or Ultimate subscription. The device alone does not include one.
See Also
- YachtLINK® — the device’s status.
- YachtLINK® Configuration — match signals so they appear here.
- Yacht Dashboard — the tile that opens this page.