Product Compliance

Regulatory declarations for YachtLINK™ (YLK-1-WIFI)

Pre-release — issued documents and drafts are both listed below. The EU and UK Declarations of Conformity, the UK PSTI Statement of Compliance and the RoHS & REACH Declaration are signed and issued, and are published here in full; Australian RCM compliance is complete. The US FCC and Canadian ISED statements are still being prepared for the launch of the YachtLINK™ hardware product and are not yet issued — they are published in draft for transparency while the supporting test evidence is finalized. Do not rely on a statement as an issued conformity document while its page carries a draft notice; the status of each is shown in the table below.

YachtLINK™ (model YLK-1-WIFI) is an NMEA 2000® marine gateway declared to the radio, EMC, safety, product-security and substance-restriction requirements of the United States, Canada, the European Union, the United Kingdom, and Australia / New Zealand. This page indexes every declaration and its current status.

YachtLINK™ is built around the Espressif ESP32-S3-WROOM-1 radio module. Each linked statement is self-declared by the manufacturer on the basis of test reports and supplier declarations held in the product's technical documentation file; no notified body or government pre-approval is involved for these routes.

Product nameYachtLINK™
Model / typeYLK-1-WIFI
DescriptionNMEA 2000® Marine Gateway
ManufacturerDurban Equity Holdings II, LLC (dba YACHTWAVE)
935 N Beneva Rd, Ste 609-2056, Sarasota, FL 34232, USA
Radio moduleContains FCC ID: 2AC7Z-ESPS3WROOM1  ·  Contains IC: 21098-ESPS3WROOM1
Frequency band2412–2462 MHz (2.4 GHz ISM band), Wi-Fi 802.11 b/g/n
Power supply9–16 V DC (SELV), from the NMEA 2000® network
Current draw56 mA @ 12 V DC typical (66 mA @ 9 V worst case)
NMEA 2000® Load Equivalency Number (LEN)2
Dimensionsapprox. 100 × 53 × 30 mm
Weightapprox. 113 g (0.25 lb)
EnclosurePETG, translucent, sealed
Ingress protectionIPX5 (IEC 60529) — protected against water jets. Do not submerge.
Ambient temperature≤ 65 °C
Local data storageInternal buffer plus a microSD card; card contents encrypted with AES-256 under a device-unique key — see Product Security & Disclosure

Status by Market

Market Framework Statement Status
United States FCC Part 15 Subpart B (Class B) — Supplier's Declaration of Conformity FCC SDoC Pending EMC report
Canada ISED ICES-003 (Class B) ISED Statement Pending EMC report
European Union Radio Equipment Directive 2014/53/EU (CE) + RoHS 2011/65/EU EU Declaration of Conformity  ·  PDF Issued — YW-DOC-CE-001 v1.0
United Kingdom Radio Equipment Regulations 2017 (UKCA) + UK RoHS 2012 UK Declaration of Conformity  ·  PDF Issued — YW-DOC-UK-001 v1.0
United Kingdom PSTI Act 2022 (product security) PSTI Statement of Compliance  ·  PDF Issued — YW-PSC-UK-001 v1.0
Australia / New Zealand RCM — Radiocommunications Act 1992 Australian Regulatory Compliance (RCM) Complete
All markets RoHS 2011/65/EU (+ UK) & REACH (EC) No 1907/2006 RoHS & REACH Declaration  ·  PDF Issued — Rev 2.0, 2026-08-07
All markets Product security (vulnerability disclosure, support period & data protection) Product Security & Disclosure Complete

NMEA 2000® Certification

The YachtLINK™ YLK-1-WIFI is NMEA 2000® Certified by the National Marine Electronics Association. Certification verifies that the device conforms to the NMEA 2000® standard for physical interface, network addressing, and message behaviour, so it can be installed on a vessel's NMEA 2000® backbone alongside equipment from other manufacturers.

Manufacturer Code1674
Product Code20196
Load Equivalency Number (LEN)2
Industry Group4 (Marine)
Network connectionSingle M12 micro-C drop, bus-powered 9–16 V DC

Transmitted and received PGN lists →

Declarations

How These Declarations Are Made

The 2.4 GHz radio inside YachtLINK™ is a pre-certified module, so the finished product is assessed as an unintentional radiator and declared against the electromagnetic-compatibility, safety, radio, cybersecurity, and substance-restriction standards that apply in each market. Where a market requires a locally established contact — a US responsible party, an EU Authorised Representative, or an Australian responsible supplier — that party is named on the relevant statement. The US responsible party is YACHTWAVE; the EU Authorised Representative and UK Importer/Authorised Representative is Euverify Ltd; the Australian Responsible Supplier / Agent is Global Approvals Pty Ltd (ABN 34 695 419 419).

Safety & Installation

These are the instructional safeguards that accompany the product under EN 62368-1 and RED Art. 10(8), summarised from the controlled Product Safety Instructions (Doc No. YW-SIN-CE-001); the full set ships in the user manual's safety section.

Contact

Questions about product compliance, or requests for a copy of the signed declarations and technical documentation, can be directed to:

Durban Equity Holdings II, LLC (dba YACHTWAVE)
6901 Professional Parkway E
Sarasota, FL 34240, USA
Email: [email protected]
Phone: +1 (941) 291-0040

To report a security vulnerability, see our Product Security & Disclosure page.